The Schlage BE365 is a popular electronic deadbolt that allows you to set and change user codes for secure access to your property. Changing the 4-digit code on your Schlage BE365 deadbolt is a simple process that can be done easily by following a few steps. Whether you want to change the code for security purposes or to give access to someone else, it is important to know how to do it correctly. In this article, we will explain how to change the 4-digit code on a Schlage BE365 deadbolt in detail, including how to delete the existing code and add a new one, as well as how to change the default programming code. By following these steps, you can ensure that your property remains secure while providing access to those who need it.
By deleting the code, you can modify the Schlage BE365 deadbolt’s 4-digit code. then replace the deleted code with a new one:
Here are the steps to add a new 4-digit code to replace the deleted one on your Schlage BE365 deadbolt:
- Enter the programming code. To do this, press the Schlage button on the keypad followed by the programming code. The Schlage button is the button with the logo on it, and the programming code is a 6-digit code that was included with the lock or can be found on the back of the deadbolt.
- Press the Schlage button again.
- Press the number “5” on the keypad.
- Enter a new 4-digit code that you want to add to the lock.
- Press the Schlage button again to save the new code.
- Test the new code by entering it on the keypad and unlocking the deadbolt.
If the new code works, the old code has been successfully deleted and replaced with the new one. If the new code does not work, repeat the steps above to ensure that the new code is entered correctly.
It is important to remember the new code and keep it in a safe and secure location. Do not share the code with anyone who does not need access to your property. By following these steps, you can easily add a new 4-digit code to your Schlage BE365 deadbolt to maintain the security of your property.
To reset the lock, follow these steps:
Here are the detailed steps to reset your Schlage BE365 deadbolt:
- Remove the battery pack located on the interior side of the deadbolt. To remove the battery pack, slide the cover-up and then pull the battery pack towards you.
- Press and hold down the Schlage button on the keypad while reinserting the battery pack. Keep holding down the Schlage button until the “Schlage” button flashes orange three times.
- Release the Schlage button once the “Schlage” button flashes orange three times.
- Press the “0” button on the keypad within 5 seconds of releasing the Schlage button. The “Schlage” button will flash green three times to indicate that the lock is ready to accept a new programming code.
- Enter a new 6-digit programming code. The new programming code can be any 6-digit number that you can remember. It is important to note that this programming code will be used to set up new user codes, so choose a code that is easy for you to remember but hard for others to guess.
- Press the “Schlage” button on the keypad to save the new programming code. The “Schlage” button will flash green three times to indicate that the new programming code has been saved.
- Test the new programming code by unlocking and locking the deadbolt with the new code. Enter the new programming code on the keypad and then turn the thumb-turn to unlock the deadbolt. Turn the thumb-turn back to the locked position and then enter the new programming code again to lock the deadbolt.
By following these steps, you can reset your Schlage BE365 deadbolt to its factory settings and set up a new programming code. It is important to remember the new programming code and keep it in a safe and secure location. After the reset, you will need to set up new user codes if you want to use the lock with codes again.
The Best Way to Modify the Default Programming Code:
Changing the default programming code on a Schlage BE365 deadbolt is a crucial step in ensuring the security of your property. The default programming code is the 6-digit code that was included with the lock or can be found on the back of the deadbolt. It is important to change this code to a new one that is known only to you and anyone else who needs access to your property. Here are the steps to change the default programming code on a Schlage BE365 deadbolt:
- Enter the current programming code. This is the default programming code that came with the lock.
- Press the Schlage button on the keypad.
- Press the number “0” on the keypad.
- Enter a new 6-digit code that you want to use as the new programming code.
- Press the Schlage button again to save the new programming code.
- Test the new programming code by entering it on the keypad and unlocking the deadbolt.
If the new programming code works, you have successfully changed the default programming code on your Schlage BE365 deadbolt. It is important to remember the new programming code and keep it in a safe and secure location. Do not share the code with anyone who does not need access to your property.
If you forget the programming code, you can reset the lock to its factory settings by removing the battery pack and holding down the Schlage button for 5 seconds. This will erase all user codes and restore the default programming code.
Frequently Asked Questions:
How do I alter the four-digit code for my Schlage lock?
To change your 4-digit Schlage lock code, you can follow these steps:
- Enter your current code.
- Press the “Schlage” button.
- Enter the programming code.
- Press the “Schlage” button again.
- Enter a new 4-digit code.
- Press the “Schlage” button one last time.
That’s it! Your new 4-digit code is now programmed and ready to use.
How can I reset the keypad lock on my Schlage BE365?
To reset your Schlage BE365 keypad lock, you can follow these steps:
- Remove the battery pack.
- Hold down the Schlage button and reinsert the battery pack.
- Release the Schlage button once the “Schlage” button flashes orange three times.
- Press the “0” button within 5 seconds.
- Enter a new 6-digit programming code.
- Press the “Schlage” button to save the new programming code.
- Test the new programming code.
That’s it! Your Schlage BE365 keypad lock is now reset to its factory settings and ready to be programmed with new user codes.
How can my BE365 model be reset?
To reset your BE365 model, you can follow these steps:
- Remove the battery pack.
- Press and hold the “Schlage” button on the keypad.
- While holding down the “Schlage” button, reinsert the battery pack.
- Release the “Schlage” button once the “Schlage” button flashes orange three times.
- Press the “0” button on the keypad within 5 seconds.
- Enter a new 6-digit programming code.
- Press the “Schlage” button on the keypad to save the new programming code.
- Test the new programming code.
How do I program a Schlage lock to change the code?
To change the code on a Schlage lock with the programming code, you can follow these steps:
- Enter the programming code.
- Press the “Schlage” button.
- Enter the user code you wish to change.
- Press the “Schlage” button again.
- Enter a new 4-digit code.
- Press the “Schlage” button one last time.
That’s it! Your new 4-digit code for the user is now programmed and ready to use.
Conclusion:
Changing the 4-digit code on a Schlage Lock BE365 is a relatively simple process that can be done by following a few steps. It involves pressing specific buttons on the keypad, entering the programming code, and creating a new 4-digit code. It is important to test the new code to ensure that it works before using it to secure your property. If you encounter any issues during the process, it is recommended to consult the Schlage lock user manual or contact Schlage customer service for assistance. Overall, changing the code on your Schlage Lock BE365 can help increase the security of your property and give you peace of mind.
- Access Control Solutions for Remote Smart Lock Management - December 15, 2023
- Jimmy Proof Lock vs Deadbolt - September 30, 2023
- Level Lock vs August: Detailed Comparison - September 30, 2023
