Schlage keypad lock keeps spinning

My Schlage Keypad Lock Keeps Spinning [Fixed]

Locks / By

The Schlage keypad lock is a popular and convenient security solution for many homes and businesses. However, if the lock’s intro keeps spinning, it may indicate an issue with the lock’s internal mechanism. This issue could be caused by a malfunctioning motor, low batteries, or problems with the lock’s programming.

To address this issue, it is recommended to check the lock’s batteries and ensure they are fully charged. If the issue persists, it may be necessary to contact a professional locksmith or the manufacturer for further assistance. It is important to address this issue promptly to ensure the security of your property.

Table Of Contents
  1. How to Fix Schlage Keypad Lock Keeps Spinning
  2. Frequently Asked Questions
  3. Final Thoughts:

How to Fix Schlage Keypad Lock Keeps Spinning

If your Schlage keypad lock is experiencing the issue of the intro spinning, here are some tips to help fix the problem:

1. Change the Batteries in Your Lock:

Changing the batteries in your Schlage keypad lock is a simple process. Here’s how you can do it:

  • Open the battery compartment: Locate the battery compartment on your lock. On most Schlage keypad locks, the battery compartment is located on the inside of the lock’s exterior housing.
  • Remove the old batteries: Remove the old batteries from the battery compartment by pulling them out of the compartment. If the batteries are difficult to remove, use a small flathead screwdriver to pry them out.
  • Insert new batteries: Insert new batteries into the battery compartment. Make sure to insert them in the correct orientation as indicated by the diagram inside the battery compartment.
  • Test the lock: Once you have inserted the new batteries, test the lock to ensure it is functioning properly. Enter your access code and verify that the lock unlocks, and locks as expected.
  • Dispose of old batteries: Dispose of the old batteries properly according to your local recycling guidelines.

It’s important to note that Schlage keypad locks typically use four AA batteries, and it’s recommended to replace them every six to twelve months to ensure optimal performance.

2. Restore Default Settings on the Lock:

To restore the default settings on your Schlage keypad lock, you can follow these steps:

  • Remove the battery cover on the back of the lock and remove the batteries.
  • Locate the reset button on the circuit board inside the lock. This button is usually labeled “reset” or “default.”
  • Press and hold the reset button for about 5-10 seconds. You will see the lock’s lights flash, indicating that the reset has been successful.
  • Reinstall the batteries and wait for the lock to power up.
  • Once the lock is powered up, you can begin the setup process again. Follow the manufacturer’s instructions for setting up your lock, including programming your access codes and other settings.

Note that restoring the default settings will erase all previously programmed access codes and other settings, so you will need to set them up again after the reset. Additionally, if you have any issues with resetting the lock or setting it up again, it’s recommended to consult the manufacturer’s instructions or contact their customer support for further assistance.

3. Reinstall the Lock:

Reinstalling a Schlage keypad lock is a relatively simple process. Here are the steps to follow:

Remove the old lock: Use a screwdriver to remove the screws that hold the old lock in place. Once the screws are removed, gently pull the lock away from the door.

Prepare the door: Check the hole in the door where the lock will be installed to ensure it is the correct size and shape for your new lock. If necessary, use a drill to adjust the size or shape of the hole.

Install the lock: Place the lock through the hole in the door, aligning the screw holes in the lock with those in the door. Once the lock is aligned, use the screws provided with the lock to secure it to the door.

Install the strike plate: Attach the strike plate to the door jamb using the screws provided with the lock. Make sure the plate is aligned properly with the lock’s bolt.

Test the lock: Test the lock by entering your access code and verifying that the lock unlocks, and locks as expected.

If you are uncertain about how to reinstall the lock or encounter any issues during the installation process, it’s recommended to consult the manufacturer’s instructions or contact a professional locksmith for assistance.

4. Lubricate the lock:

Lubricating your Schlage keypad lock’s internal components can help resolve the issue of the lock spinning. Here are the steps to lubricate the lock:

Turn off the lock: Remove the batteries from the lock to ensure that it is turned off.

Apply lubricant: Apply a small amount of lubricant, such as graphite powder or silicone spray, to the lock’s internal components, including the latch, bolt, and moving parts of the lock.

Work the lock: After applying the lubricant, work the lock several times by entering your access code and verifying that the lock unlocks and locks smoothly. This will help distribute the lubricant evenly throughout the lock’s internal components.

Wipe away excess lubricant: Use a clean, dry cloth to wipe away any excess lubricant from the lock’s external components. This will help prevent dust and debris from sticking to the lubricant.

Reinstall the batteries: Once you have finished lubricating the lock and wiping away any excess lubricant, reinstall the batteries and test the lock again to ensure it is functioning properly.

Note that it’s important to use the correct type of lubricant for your lock. Refer to the manufacturer’s instructions or consult a professional locksmith for guidance on the appropriate type of lubricant to use.

5. Contact the manufacturer:

If the above tips do not resolve the issue of your Schlage keypad lock spinning, it’s recommended to contact the manufacturer for assistance. You can find the manufacturer’s contact information on the packaging or in the instruction manual that came with the lock.

Before contacting the manufacturer, be sure to have your lock’s model number and serial number available, as well as a description of the issue you are experiencing. The manufacturer may provide additional troubleshooting steps or recommend repair or replacement of the lock, depending on the specific issue.

If your lock is still under warranty, the manufacturer may offer free repair or replacement. Even if your lock is not under warranty, the manufacturer may still be able to help, such as by providing repair services or replacement parts for a fee.

Remember that attempting to fix the lock yourself, especially if you are not familiar with the lock’s internal components, can cause further damage and potentially avoid any existing warranties. It’s best to contact the manufacturer or a professional locksmith for assistance if you are unable to resolve the issue on your own.

Frequently Asked Questions

1. What is a Schlage keypad lock?

A Schlage keypad lock is a type of electronic lock that utilizes a keypad instead of a traditional key to unlock or lock a door.

2. What does it mean when the Schlage keypad lock keeps spinning?

When the Schlage keypad lock keeps spinning, it typically means that the lock is not engaging properly and is unable to lock or unlock the door.

3. Why is my Schlage keypad lock spinning?

There can be several reasons why a Schlage keypad lock is spinning. It could be due to a malfunctioning internal component, a loose connection, or a dead battery.

4. How can I troubleshoot a Schlage keypad lock that keeps spinning?

You can troubleshoot a Schlage keypad lock that keeps spinning by first checking the battery and replacing it if necessary. You can also try resetting the lock or cleaning the internal components. If none of these solutions work, you may need to contact a professional locksmith for assistance.

5. Can a spinning Schlage keypad lock be fixed?

Yes, a spinning Schlage keypad lock can be fixed. The exact solution will depend on the cause of the issue, but in many cases, a simple repair or replacement of a component can solve the problem.

6. How much does it cost to repair a spinning Schlage keypad lock?

The cost to repair a spinning Schlage keypad lock will vary depending on the extent of the damage and the necessary repairs. It’s best to contact a locksmith or Schlage representative for an accurate estimate.

7. Why does my keypad door lock keep spinning?

A keypad door lock can keep spinning if there is a problem with the internal components or if the lock is not correctly installed. Other possible causes include dead batteries or a loose connection.

8. How do you fix a lock that keeps spinning?

The solution to fixing a lock that keeps spinning depends on the cause of the problem. It could be a simple fix such as replacing the battery or cleaning the internal components. In some cases, a professional locksmith may need to be consulted to replace or repair a damaged component.

9. Why does my deadbolt lock keep spinning?

A deadbolt lock can keep spinning if there is a problem with the internal components or if the lock is not correctly installed. Other possible causes include dead batteries or a loose connection.

10. Why is my Schlage keyless lock not working properly?

A Schlage keyless lock may not be working properly due to a variety of reasons, including dead batteries, a malfunctioning internal component, or a loose connection. Troubleshooting steps include replacing the batteries, resetting the lock, or cleaning the internal components. If these solutions do not work, a professional locksmith may need to be consulted.

Final Thoughts:

A Schlage keypad lock that keeps spinning can be a frustrating issue to deal with. However, there are several steps you can take to try and fix the problem, including checking the batteries, restoring default settings, reinstalling the lock, cleaning, and lubricating the lock’s internal components, and contacting the manufacturer for assistance.

By following these tips and taking appropriate action, you can potentially resolve the issue and restore your Schlage keypad lock to proper working order. If you are unable to fix the issue on your own, it’s recommended to contact a professional locksmith for assistance.

Latest posts by Wayne (see all)

Related Posts